Fully packaged skid mounted boiler ready for operation c/w feedwater tank, ID fan, feedwater pump, control panel, level controls & valves.
Simple and inexpensive to install
Manufactured at THERMAX India plant in Pune
Refer to brochure in downloads section
Package Shell Type Boilers:
1 to 25 tonne/hr ‘from and at’ steam output rating
6 to 26 bar pressure rating
Gas, Oil, Coal, Biomass fired
Solid Fuel firing - 82±2% thermal efficiency on GCV for conventional solid fuels (coal) and 78±2% for biomass (rice husk, wood waste)
Gas Oil firing – up to 92±2% thermal efficiency on GCV with heat recovery systems.
Average 88±2% thermal efficiency on GCV for gas and oil fired fuels
Burner (gas and oil), chain grate stoker (coal with GCV>26 MJ/kg and ash<20%), fluidised bed (lower grade solid fuels with GCV>13-14 MJ/kg, typically high ash coals(up to 40%) and biomass fuels (max. moisture content 35-40%)
Designed and manufactured to BS EN 12953 or ASME Section 1 & IBR.
Refer to brochures “COALMAX”, “COMBIPAC”, “SHELLMAX”, “COMBIMAX” and “WOODPAC” in downloads section.
COALMAX, COMBIPAC and WOODPAC composite design with various combustion systems designed and manufactured at one of the THERMAX plants located in India or Europe.
Package Bi-Drum Water – Tube Boilers:
6 to 32 tonne/hr steam output rating
10 to 64 bar pressure rating
80±2% thermal efficiency
Gas, Oil, Coal, Biomass fired
Burner (gas and oil), chain grate stoker (coal with GCV>26 MJ/kg and ash<20%), fluidised bed (lower grade solid fuels with GCV>13-14 MJ/kg, typically high ash coals (up to 40%) and biomass fuels (max. moisture content 35-40%)
Can be used to supply saturated steam for process plant or superheated steam (up to 460˚C) for supply to back-pressure or full condensing turbo-generator plant
Thermax POWERMax range or boilers manufactured at THERMAX India plant in Pune
Thermal Oil Heaters:
From 0.1 million up to 11 million kcal/hr capacity
Gas, Oil, Coal, Biomass fired
Forced circulation in concentric helical tube coil
PN6, 10, 16, 40 bar and 64 bar ratingANSI #150, #300 and #600
Up to 400 ˚C
Carbon steel and stainless steal
PN or ASME flanges, NPT thread, socket weld or butt weld connections
Inbuilt strainer
Steam pressure reducing and de-superheating stations:
Complete assembly with instrumentation and control systems
400NB to 300NB
Range of pressure rating and piping materials
Steam moisture in-line separator:
15NB to 150NB (up to 300NB on special order)
PN6, 10, 16, 40 bar and 64 bar rating
ANSI #150, #300 and #600
Up to 400 ˚C
Direct steam injection heating:
Inline and tank heating applications
Water heating, slurry heating, sludge heating, starch jet cooker, anaerobic digestion, wastewater, biogas production, wet milling, & tank jet Sparger applications for process heating & general industrial applications for example, pulp, slurry and tomato paste.
Manufactured at ProSonix plant in Milwaukee, WI USA
Heat Recovery and Monitoring equipment:
Condensate recovery and transfer pump
Blow down heat recovery
Flash vessels
Atmospheric and pressurised de-aerator
Magnetic level gauge
Boiler efficiency monitoring system
Combustion Oxygen monitoring system (zirconium type probe)
Steam and water flow meters
Condensate recovery and transfer pump
Blow down heat recovery
Flash vessels
Atmospheric and pressurised de-aerator
Magnetic level gauge
Boiler efficiency monitoring system
Steam and water flow meters
Oil or Gas Fired Engine Heat Recovery Boiler:
Suitable for generator set engine fuels –gas and liquid fuel
Smoke tube and water-tube types
Standard range:
Oil engines up to 2 MWe, single engine capacity
Gas engines up to 5 MWe, single engine capacity
High purity steam
Can support fluctuating steam requirements
Steam pressure ratings available: 10.5, 17.50 and 25 bar
Customised products can be offered for higher capacities/different engine fuel exhausts
Refer to “EnerGen” brochure in downloads section
Manufactured at THERMAX India plant in Pune
Heat Pumps:
Heat pumps drive heat from a lower temperature to medium temperature, using high grade energy. Thermax heat pumps utilise steam, hot water, exhaust, fuel, geothermal energy or any combination of these heat sources, to pump heat. Heat pumps save approximately 35 % of heat energy.
Thermax heat pumps are extensively used Scandinavian countries for heating applications. Heat pumps are also used in industries like: textile plants, edible oil, food, auto & white goods, etc. Heat pumps can also be used for feed water applications, for furnace oil fired boilers. Thermax has over 100 MW capacity of heat pump installations to its credit, installed across the globe.
